How To Use MI Paste Plus: Complete Clinical Guide For Remineralization
MI Paste Plus is an advanced topical cream containing Recaldent (CPP-ACP) and 900 ppm fluoride designed to remineralize tooth enamel, reverse early white spot lesions, and relieve hypersensitivity. Proper application requires clean teeth, a precise bean-sized amount applied via custom trays or a clean finger, and a minimum three-minute residence time without rinsing or eating afterward.
Pre-Application Protocol and Material Checklist
Achieving optimal clinical outcomes with MI Paste Plus requires strict adherence to preparation standards. The active ingredients—Casein Phosphopeptide-Amorphous Calcium Phosphate (CPP-ACP)—rely on direct contact with the tooth structure to bind free calcium and phosphate ions into the enamel matrix. Before initiating treatment, gather the necessary materials and verify your underlying oral health status with a dental professional, particularly regarding milk protein allergies.
- Essential Gear and Materials: MI Paste Plus tube (available in mint, strawberry, melon, tutti-frutti, and vanilla flavors), clean toothbrush, dental floss, and optional custom-fitted application trays or interdental brushes for targeted delivery.
- Mandatory Prerequisite Standards: Thorough plaque removal via brushing and flossing to ensure direct ion transfer to the enamel surface; verification that the patient is not allergic to milk proteins (casein) or hydroxybenzoates.
- Duration and Frequency Benchmarks: Standard application lasts for three to five minutes per session, typically executed once or twice daily after regular oral hygiene routines, continuing for the duration recommended by your dental practitioner.
Step-by-Step MI Paste Plus Application Workflow
Step 1: Perform Thorough Oral Hygiene
Begin by brushing your teeth thoroughly with a standard fluoride toothpaste, followed by flossing to remove all interdental plaque and debris. The tooth surfaces must be entirely clean and free of biofilm to allow the CPP-ACP complex to make direct contact with the microscopic enamel pores. After brushing, spit out the excess toothpaste, but do not aggressively rinse your mouth with large amounts of water, as a small amount of residual fluoride can enhance the remineralization synergy.
Pro-Tip: For maximum efficacy, apply MI Paste Plus right before bed so the active ingredients can maintain prolonged contact with your teeth throughout the sleep cycle without being washed away by daytime salivary flow or eating.
Step 2: Dispense and Apply the Product
Dispense a bean-sized amount of MI Paste Plus (approximately 0.5 milliliters) onto a clean finger, a cotton swab, or directly into a custom-fitted dental tray. If treating localized sensitivity or a specific white spot lesion, use a clean finger or an interdental brush to smear the cream directly onto the affected tooth surfaces. Ensure that all targeted areas are generously coated with an opaque layer of the paste.
Step 3: Maintain Contact and Let Sit
Allow the applied paste to remain undisturbed on the teeth for a minimum of three to five minutes. During this period, the casein proteins bind to the tooth surface, plaque, and soft tissue, stabilizing bio-available calcium and phosphate ions.
Warning: Do not rinse your mouth, drink liquids, or consume any food immediately after applying the paste. Saliva will naturally mix with the cream to enhance the treatment's effectiveness, so allow this mixture to coat the teeth as long as possible.
Step 4: Disperse and Finish
After the contact time has elapsed, use your tongue to spread the remaining residue around your mouth, and then spit out any excess cream. Do not rinse with water or use mouthwash. Gently wipe away any visible residual paste with a tissue if necessary. The microscopic remnants left behind will continue to release calcium, phosphate, and fluoride ions over the subsequent hours.
MI Paste Plus | GC Europe N.V.
Technical Specifications and Delivery Method Comparison
| Application Method | Ideal Clinical Indication | Estimated Contact Time | Patient Comfort Level | Efficacy for Generalized Wear |
|---|---|---|---|---|
| Custom Dental Trays | Full-mouth erosion, severe sensitivity, rampant decay prevention | 3 to 5 minutes | High (passive retention) | Maximum (covers all surfaces evenly) |
| Clean Finger / Q-Tip | Localized white spot lesions, single sensitive tooth, gum recession | 3 to 5 minutes | Moderate (requires manual placement) | Moderate (best for targeted spots) |
| Interdental Brushes | Proximal root caries, interdental spacing, orthodontic bracket areas | 3 to 5 minutes | Moderate to Low | High for interproximal zones |
Common Usage Errors and Clinical Failure Fixes
- Root Cause: Rinsing the mouth immediately after application washes away the active CPP-ACP and fluoride ions before they can penetrate the enamel pores.
- Actionable Fix: Adjust your routine to spit out the excess paste after the timer ends, leaving the thin residual film on the teeth without rinsing with water for at least 30 minutes.
- Root Cause: Applying the product over unbrushed teeth covered in heavy dental plaque or food debris blocks direct ion transfer to the enamel structure.
- Actionable Fix: Strictly enforce a pre-application hygiene step involving thorough brushing and flossing before every treatment session.
- Root Cause: Allergic reaction manifested by hives, swelling of the lips, or respiratory discomfort due to an undiagnosed allergy to milk proteins.
- Actionable Fix: Discontinue use immediately, consult a physician or allergist, and switch to a milk-protein-free alternative such as a pure sodium fluoride or functionalized tricalcium phosphate paste.
- Root Cause: Ineffective treatment of deep dentinal hypersensitivity due to insufficient contact time or erratic application schedules.
- Actionable Fix: Utilize custom-fitted whitening or fluoride trays filled with MI Paste Plus to ensure uniform, prolonged contact across all exposed root surfaces for a full five minutes twice daily.
Frequently Asked Questions
Can I eat or drink after using MI Paste Plus?
You should wait at least 30 minutes after application before consuming any food or beverages. Eating or drinking immediately will wash away the active therapeutic ingredients and drastically reduce the remineralization benefits of the cream.
Is MI Paste Plus safe for children?
Yes, MI Paste Plus is generally safe for children, but it contains 900 ppm sodium fluoride and should be used under adult supervision to prevent excessive swallowing. Always consult a pediatric dentist before introducing fluoride-containing treatments to children under the age of six.
Can I use MI Paste Plus if I am lactose intolerant?
MI Paste Plus is derived from milk protein (casein), so individuals with a true milk protein allergy must avoid it entirely. However, because it contains negligible amounts of lactose, people with simple lactose intolerance can often use it safely, though consulting your doctor is strongly advised.
How does MI Paste Plus differ from regular toothpaste?
Standard toothpaste is formulated with abrasive agents for mechanical plaque removal and lower concentrations of fluoride for surface hardening. MI Paste Plus is a specialized topical cream designed to be applied after brushing to deliver high concentrations of bio-available calcium, phosphate, and fluoride directly into demineralized enamel.
How long does it take to see results on white spot lesions?
Visible improvement in early white spot lesions typically occurs within four to twelve weeks of consistent daily application. The exact timeline depends on the severity of the demineralization, your dietary habits, and your natural salivary composition.
Start Your Enamel Restoration Journey Today
Incorporate MI Paste Plus into your daily oral care routine to actively reverse early decay, protect vulnerable root surfaces, and eliminate persistent sensitivity. Consult your dental professional today to determine the ideal custom application schedule for your specific clinical needs.
